The Supernetting/CIDR
Chart
Introduction
Because subnet masks can get very confusing, the
creators of this wonderful network technology also
made available a few things to make life somewhat
easier.
The following chart is really a summary of what
we've seen so far. It gives you a good idea of the
networks we can combine and the result we'd see.
The Supernetting/CIDR
chart
There are four columns available in our chart:
The
CIDR Block,
the Supernet Mask,
Number of Class C
Networks and the
Number
of Hosts column.
Class C |
CIDR Block
|
Supernet Mask
|
Number of Class C Networks
|
Number of Hosts
|
/14
|
255.252.0.0
|
1024
|
262144
|
/15
|
255.254.0.0
|
512
|
131072
|
/16
|
255.255.0.0
|
256
|
65536
|
/17
|
255.255.128.0
|
128
|
32768
|
/18
|
255.255.192.0
|
64
|
16384
|
/19
|
255.255.224.0
|
32
|
8192
|
/20
|
255.255.240.0
|
16
|
4096
|
/21
|
255.255.248.0
|
8
|
2048
|
/22
|
255.255.252.0
|
4
|
1024
|
/23
|
255.255.254.0
|
2
|
512
|
/24
|
255.255.255.0
|
1
|
254
|
/25
|
255.255.255.128
|
1/2
|
126
|
/26
|
255.255.255.192
|
1/4
|
62
|
/27
|
255.255.255.224
|
1/8
|
32
|
/28
|
255.255.255.240
|
1/16
|
16
|
/29
|
255.255.255.248
|
1/32
|
8
|
/30
|
255.255.255.252
|
1/64
|
4
|
I am going to explain the meaning of each column,
although you probably already know most of them.
The CIDR Block
The
CIDR Block
simply represents the number
of bits used for the subnet mask. For example,
/14
means
14 bits
assigned to the subnet mask,
it is a lot easier telling someone you have a
14 bit
subnet mask rather than a
subnet mask of
255.252.0.0 :)
Note:
In the above paragraph, I called the
14 bits
as a subnet mask, when in fact
it's a supernet mask, but because when you configure
any network device, the field you will need to enter
the value is usually named as the 'subnet mask', I
decided to name it 'subnet mask' aswell, in order to
avoid confusion.
I'd like you to pay particular
attention to the CIDR
Block /24,
and /25
to
/30.
These blocks are highlighted
in yellow
and
blue
because I want them to grab
your attention :)
When we use a
CIDR Block
of
24
(24
bit subnet mask) we are
not Supernetting
! This is a default subnet mask for a
Class C network.
With
CIDR Blocks
/25
to
/30
we are actually
Subnetting
and not
Supernetting
!
Now you might wonder why I
have them in the chart. The fact is that those
particular CIDR Blocks
are valid, regardless of
whether applying them to a network means we are
Subnetting
and not Supernetting.
If you have dealt with any ISPs and IP Address
assignments, chances are you would have been given
your IP Addresses in CIDR format.
A good example is if you
wanted a permanent connection to your ISP and only
required 2 IP Addresses, one for your router and one
for your Firewall, you would be assigned one
/30 CIDR
Block. With such a
subnet mask you will have 4 IP Addresses, from which
2 will be reserved (one for the Network address and
one for the Broadcast address) and you're left with
2 that you can assign to your hosts (router and
firewall).
The Supernet Mask
Basically, this is your Subnet
mask. When you configure the devices that will be
attached to the specified network, this is the value
you will enter as a Subnet mask. It's also the
decimal value the CIDR
Block specifies. For
example, a /24
CIDR block
means a 24 bit
Subnet mask, which in its turn
translates to
255.255.255.0 :) Simple
stuff !
Number of Class C Networks
This number shows us how many
Class C Networks
are combined by using a
specific Supernet mask
or, if you like,
CIDR Block.
For example, the
/24
CIDR Block,
255.255.255.0 Supernet
mask is
1 Class C Network,
whereas a /20
CIDR Block,
255.255.240.0 Supernet
mask is
16 Class C networks.
Number Of Hosts
This
value represents the number of hosts per Supernet.
For example, when we use a
/20
CIDR Block,
which means a Subnet
(or Supernet)
mask of 255.255.240.0,
we can have up to 4096
hosts.
Pretty straightforward
stuff.
There is one thing you must be
careful of though ! The value
4096
does not represent the valid,
usable IP Addresses. If you wanted to find out how
many of these IP Addresses you can actually use, in
other words, assign to hosts, then you simply take 2
IP Addresses from that number (the first and last IP
Address), so you're left with
4094
IP Addresses to play with :)
Why take 2 away ?
You shouldn't be asking
questions like that if you have read the IP and
Subnetting sections but I'll tell you anyway :) One
is reserved for the
Network Address and one
for the Broadcast
Address of that network
!
Summary
That completes the explanation
of the Supernetting/CIDR
chart. You will see that
Supernetting and Subnetting have quite a few things
in common, and this is simply because they work on
the same principle.
Again, if you have the whole topic, or certain
sections hard to understand, you should give
yourself a small break, and then come back for
another round :)
|